Dwyer Magnehelic Gauge

Dwyer Magnehelic Gauge

Measuring Range 010KPA

Weight 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).

Size 4

Brand Dwyer

Model 2000

Pressure Limits -20 in Hg to 15 psig (-0.677 to 1.034 bar)

Temperature Limits 20 to 140 Degree F(-6.67 to 60 Degree C).

Process Connections 1/8

Overview

Select the Dwyer Magnehelic gage for high accuracy - guaranteed within 2% of full scale - and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures - either positive, negative (vacuum) or differential.

The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems.

It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Note

May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Accuracy

+-2% of FS (+-3% on - 0, -100 Pa, -125 Pa, 10MM and +-4% on - 00, -60 Pa, -6MM ranges), throughout range at 70 DegreeF (21.1 DegreeC).

Service

Air and non-combustible, compatible gases (natural gas option available).

Wetted Materials

Consult factory.

Standard Accessories

Two 1/8 NPT plugs for duplicate pressure taps, two 1/8 pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)

Agency Approval

RoHS

Standard Accessories

Two 1/8 NPT plugs for duplicate pressure taps, two 1/8 pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)

Low temperature models available as special option.For applications with high cycle rate within gage total pressure rating, next higher rating is recommended. See Medium and High pressure options at lower left.

Low temperature models available as special option.For applications with high cycle rate within gage total pressure rating, next higher rating is recommended. See Medium and High pressure options at lower left.

E-mail :

dpsharma74@yahoo.co.in,

dpengineers007@yahoo.co.in,

info.dpengineers@yahoo.co.in

Mr D.P.SHARMA

9871014210

WhatsApp number :9871014210,9268631221

Websites :

www.dp-engineers.co.in

www.dpengineers.in

www.dpengineer.in

www.dpengineers.co.in

www.dpengineer.co.in

www.dpengineersindia.com

www.dpengineerindia.com

www.dpengineersindia.in

www.dpengineers.info

www.dpengineer.info

www.dp-engineers.com

www.dpengineerindia.in

www.dpengineersindia.net

www.dpengineersdelhi.co.in

www.dpengineersdelhi.com

www.dpengineersdelhi.net

https://www.youtube.com/watch?v=3KaLJsSV8Wo

https://www.youtube.com/watch?v=-O3rEhEyOzM

https://www.youtube.com/watch?v=mHle_D9SPnM

https://www.youtube.com/watch?v=Rl9dB5Uhl-c

https://www.youtube.com/watch?v=aU-cQCztS2s

https://www.youtube.com/watch?v=F9efnoISLw0

https://www.youtube.com/watch?v=SiYNp51HXbg

https://www.youtube.com/watch?v=EcY986bScqE

https://www.youtube.com/watch?v=LRgGmwyt_d0