Series 2000 Magnehelic Differential Pressure Gages
Posted by Admin on June, 22, 2021
Series 2000 Magnehelic Differential Pressure Gages
Measuring Range 010KPA
Weight 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
Size 4
Brand Dwyer
Model 2000
Pressure Limits -20 in Hg to 15 psig (-0.677 to 1.034 bar)
Temperature Limits 20 to 140 Degree F(-6.67 to 60 Degree C).
Process Connections 1/8
Overview
Select the Dwyer Magnehelic gage for high accuracy - guaranteed within 2% of full scale - and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures - either positive, negative (vacuum) or differential.
The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems.
It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.
Note
May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Accuracy
+-2% of FS (+-3% on - 0, -100 Pa, -125 Pa, 10MM and +-4% on - 00, -60 Pa, -6MM ranges), throughout range at 70 DegreeF (21.1 DegreeC).
Service
Air and non-combustible, compatible gases (natural gas option available).
Wetted Materials
Consult factory.
Standard Accessories
Two 1/8 NPT plugs for duplicate pressure taps, two 1/8 pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
Agency Approval
RoHS
Standard Accessories
Two 1/8 NPT plugs for duplicate pressure taps, two 1/8 pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
Low temperature models available as special option.For applications with high cycle rate within gage total pressure rating, next higher rating is recommended. See Medium and High pressure options at lower left.
Low temperature models available as special option.For applications with high cycle rate within gage total pressure rating, next higher rating is recommended. See Medium and High pressure options at lower left.
E-mail :
dpsharma74@yahoo.co.in,
dpengineers007@yahoo.co.in,
info.dpengineers@yahoo.co.in
Mr D.P.SHARMA
9871014210
WhatsApp number :9871014210,9268631221
Websites :
www.dp-engineers.co.in
www.dpengineers.in
www.dpengineer.in
www.dpengineers.co.in
www.dpengineer.co.in
www.dpengineersindia.com
www.dpengineerindia.com
www.dpengineersindia.in
www.dpengineers.info
www.dpengineer.info
www.dp-engineers.com
www.dpengineerindia.in
www.dpengineersindia.net
www.dpengineersdelhi.co.in
www.dpengineersdelhi.com
www.dpengineersdelhi.net
https://www.youtube.com/watch?v=3KaLJsSV8Wo
https://www.youtube.com/watch?v=-O3rEhEyOzM
https://www.youtube.com/watch?v=mHle_D9SPnM
https://www.youtube.com/watch?v=Rl9dB5Uhl-c
https://www.youtube.com/watch?v=aU-cQCztS2s
https://www.youtube.com/watch?v=F9efnoISLw0
https://www.youtube.com/watch?v=SiYNp51HXbg
https://www.youtube.com/watch?v=EcY986bScqE
https://www.youtube.com/watch?v=LRgGmwyt_d0
This entry was posted on June, 22, 2021 at 06 : 51 am and is filed under Magnehelic Gauge Dwyer Magnehelic Gauge Wholesale DPENGINEERS DELHINCRINDIA. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response from your own site.
Leave a Comment